A clogged drain can be a nightmare, especially if you have guests coming over or if it’s the holiday season. Of course, this is an issue that requires fixing as quickly as possible.
But before you head over to call your plumber, here are a few things you can try to handle the situation yourself.
1. Use boiling water
Pour boiling water into clogged drains. This is the simplest and most affordable DIY solution. Use a mug to get rid of the standing water in the sink. Then pour boiling water into it and wait for 10 to 15 minutes. You may have to repeat this step several times to get the water moving.
2. Use Home Remedies
After performing the first step, you can also apply a few homemade remedies to unclog your drain further. Here are some of our tried-and-tested DIY drain cleaners you can prepare at home:
- Salt and boiling water: Throw a half cup of salt into a clogged drain. Pour a kettle of boiling water over the top. Let it sit for 20-minutes and flush with another kettle of boiling water.
- White vinegar and soda: Take a cup of soda and pour it into your drain. Also, pour a cup of vinegar and let this mixture rest for at least 10 minutes. Flush some boiling water down the drain.
- Soda and salt: Mix half cup of soda with a half cup of salt and pour this mixture into your drain. Let this mixture sit for 2-3 hours. Pour boiling water to flush it down the drain.
3. Use a plunger
Yes, you read that right. You can also use a plunger to unclog your sink. Fill in your sink with some hot water. Place a plunger over the drain and work it up and down quickly. Then pull it off the drain and see if the water starts to drain. Easy peasy…
4. Unplug the disposal
Did you know there is a reset switch under the bottom of the disposal? Unplug it, turn off the breaker, and check if anything is caught in the device.
5. Use a commercial drain cleaner
In most cases, a DIY drain cleaner is enough to resolve the issue. If not, you can give any commercial drain cleaner a try. Just ensure you pick a product that is safe to use. Also, follow instructions properly to avoid any sort of physical harm or damage.
6. Detach the P-trap
Before calling your plumber, you can also check pipes yourself to spot the blockage/leakage. For this, you have to open the cabinet fixed underneath your sink. Pour in a large bucket of water to observe any water that may drain out. The next step is to detach a p-trap. Remove any debris you find in that compartment. Replace the trap and run water through it.
7. Spot a clog using a coat hanger
You can use a coat hanger or a professional plumber’s snake to reach down your drain. This will enable you to find the source of the clog.
8. DIY tasks that should be done before a service call
If all else fails, the last thing you may want to do is call a professional plumber in Chula Vista. Review your local listing and search for a reliable resource with positive testimonials and affordable pricing.
But make sure you do these 3 things ahead of calling in a professional. This will save you and your plumber time and energy. Not only this, but it will also help you save service charges.
- Clear the worksite
- Turn off the water
- Switch off the electricity
Call a Professional
If you have a minor plumbing issue, it is better to try a few DIY tricks before making a call to a plumber. But, it is also important to know that most plumbing issues are complicated. It is very easy for anyone to damage /break pipes while trying to resolve issues on their own.
That is why it is better to trust experts for all your residential plumbing needs.
Have you tried any DIY tricks to unclog your drains earlier? You can share your experience by dropping a comment down below. We’d love to hear back.
No comments:
Post a Comment